Alcohol Neutral Silicone Weather Resistant Adhesive Won 660

Suitable for general sealing and bonding , such as copper doors, door and window glass, metal roofs, gutters , etc. 

lt has strong adhesion to aluminum, stainless steel, bricks, ceramics and most metal adhesives and plastics.

 The surface must be clean, dry and free of oil and dirt. Use a suitable solvent such as isopropyl alcohol to clean, never soap or detergent . 

If you want to achieve a more beautiful effect, use tape to cover the surfaces on both sides of the joint before gluing , cut the nozzle according to the required diameter and put it into the glue gun.

Trim the sealant immediately after use and remove the masking tape (about10 minutes ).

Use a solvent such as isopropyl alcohol, MEK, or rubbing alcohol to remove any remaining sealant.

The storage temperature is 5-27C，and the shelf life is 9 months after packaging

Please refer to the date marked on the packaging to confirm the shelf life.

Our company is responsible for the performance of silicone sealants that are stored and used correctly within the validity period.

Within this scope, if the silicone sealant fails to meet quality requirements, the user can replace or refund the product.

Otherwise, the company does not assume any other direct or indirect liability for compensation.

lt is the user's responsibility to choose the appropriate company's products according to their needs.

Please perform construction in a sufficiently ventilated environment.

Uncured sealant may irritate the skin or eyes. Please take measures to protect your eyes .

If you accidentally touch your eyes, rinse them thoroughly with running water for 15 minutes and seek medical attention immediately.

Do not put this product in contact with food.Please keep out of the reach of children Ingestion of this product may cause harm to the body.

This product will release acetic acid during curing, and long-term inhalation may cause chronic damage to health.

Results show that long-term inhalation of excessive doses in laboratory animals can cause blood damage.